The fleet
Every machine we hire, by type, with the figures you’ll be asked for on site. Tick the ones you need and they go on your enquiry.

Excavators
Tracked diggers from a 1.5 tonne mini that fits through a side gate to a 22 tonne machine for bulk digs.
Each one goes out serviced and greased, with a set of buckets. Tell us the job and the access, and we’ll tell you which size fits.
5 lines on the schedule
| Ref | Machine | Operating weight | Dig depth | Width | Enquiry |
|---|---|---|---|---|---|
| EX-01 | 1.5 tonne mini excavator | 1.8 t | Over 2 m | 0.98 m, tracks in | |
| EX-02 | 3 tonne mini excavator | 2.6 t | 2.7 m | 1.4 m | |
| EX-03 | 5 tonne mini excavator | 5.0 t | 3.4 m | 1.96 m | |
| EX-04 | 8 tonne midi excavator | 8.6 t | 4.4 m | 2.3 m | |
| EX-05 | 22 tonne excavator | 22 to 24.7 t | 6.7 m | 2.8 to 3.0 m |
Dumpers
Site dumpers from 1 to 9 tonnes, for moving spoil and stone where a lorry can’t go.
The 1 tonne high-tip empties straight into a skip. The swivel skips tip to either side, which saves turning round in a tight spot.
4 lines on the schedule
| Ref | Machine | Payload | Skip | Width | Enquiry |
|---|---|---|---|---|---|
| DU-01 | 1 tonne high-tip dumper | 1,000 kg | High tip | 0.98 to 1.2 m | |
| DU-02 | 3 tonne swivel dumper | 3,000 kg | Swivel | 1.65 m | |
| DU-03 | 6 tonne dumper | 6,000 kg | Forward or swivel | 2.24 m | |
| DU-04 | 9 tonne dumper | 9,000 kg | Forward tip | 2.5 m |
Rollers
Ride-on vibrating rollers for sub-base, paths, drives and patching.
Both are twin-drum machines. The 800 fits a footpath; the 1200 covers a drive or a car park in fewer passes.
2 lines on the schedule
| Ref | Machine | Operating weight | Drum width | Drums | Enquiry |
|---|---|---|---|---|---|
| RO-01 | 800 ride-on roller | 1.55 t | 800 mm | Twin, vibrating | |
| RO-02 | 1200 ride-on roller | 2.7 t | 1,200 mm | Twin, vibrating |
Telehandlers
Rough-terrain telehandlers with forks, from a compact 6 metre to an 18 metre machine.
Every telehandler goes out with its current report of thorough examination. Tell us the heaviest load and how high it has to go.
3 lines on the schedule
| Ref | Machine | Lift height | Lift capacity | Suits | Enquiry |
|---|---|---|---|---|---|
| TH-01 | 6 metre telehandler | 6 m | 2,500 kg | Tight sites | |
| TH-02 | 14 metre telehandler | 13.8 m | 4,000 kg | Housebuilding | |
| TH-03 | 18 metre telehandler | 17.5 m | 4,000 kg | Taller buildings |
Attachments
Hired with the machine, fitted and tested in our yard before it leaves.
Say what you’re breaking, boring or grading, and we’ll match the attachment to the machine.
4 lines on the schedule
| Ref | Machine | Fits | Used for | Hired | Enquiry |
|---|---|---|---|---|---|
| AT-01 | Hydraulic breaker | 1.5 to 22 t excavators | Concrete and rock | With the machine | |
| AT-02 | Earth auger | 1.5 to 8 t excavators | Post and pile holes | With the machine | |
| AT-03 | Grading bucket | All excavators | Trimming and finishing | With the machine | |
| AT-04 | Selector grab | 8 and 22 t excavators | Sorting and loading | With the machine |
Figures are typical for the class of machine. The sheet for the exact machine comes with your quote.

Drive it yourself, or hire it with an operator.
| Self-drive | Operated | |
|---|---|---|
| Who drives it | You, or your own operator | One of our operators |
| Cards | Most sites will ask to see a CPCS or NPORS card for the machine | Our operators hold CPCS or NPORS cards for the machines they run |
| Booked by | The day, the week or longer | The day or the week, with travel agreed up front |
| Good for | Firms with their own carded drivers | A job that needs a driver who knows the machine |